Loading the content... Loading depends on your connection speed!

Call toll free: Offline
Shopping Cart - $0.00

Replacement Parts

Needak® Quality Replacement Parts

from the oldest rebounder factory in America.

Since Needak® is a manufacturer and not an importer, we always have parts in stock.

All of our parts are designed specifically for the Needak® rebounder and are classified by mat spring type.  At the bottom of this page is a serial number guide to help you identify your rebounder mat spring.

If you do not have a Needak® rebounder, you may be able to use our parts on your rebounder.  Study the descriptions below carefully to determine if our parts will fit your rebounder.  Specifications for use of our parts are:

40 inch diameter frame with six (6)  1 inch diameter legs attached to the frame with a heavy duty spring.  Overall height is 10 inches.

36 mat springs connecting on one end to 36 Clevis Pins that pass through a hole in the frame and at the other end connect to 18 metal cleats that are sewn into the edge of the jump mat.


Soft-bounce™ (85% absorption)
The Needak® Soft-bounce™ rebounder utilizes a 4¼ inch (hook to hook) barrel spring with coils that taper from the center to the outside.  The center coils are approximately 1⅛ inch in diameter and the coil near the spring hook is approximately ⅞ inch in diameter.  The legs of this rebounder are 9 inches long.  ThePermatron® jump mat is approximately 28¼ inches in diameter.
Click here for Soft-bounce™ parts. 
Hard-bounce™ (40% absorption) The Needak® Hard-bounce™ rebounder was originally designed with users weighing 300 to 600 pounds in mind.  It also utilizes a 4¼ inch (hook to hook) barrel spring with coils that taper from the center to the outside.  The center coils are approximately 1⅛ inch in diameter and the coil near the spring hook is approximately ⅞ inch in diameter.  However, the spring uses a larger diameter wire and different manufacturing characteristics which allow it to support larger users.  It is not as stiff or brittle as the Classic spring it replaced. The legs of this rebounder are also 9 inches long.  The Permatron® jump mat is approximately 28¼ inches in diameter as well.
Click here for Hard-bounce™ parts. 
Classic (20-30% absorption) The “Classic” rebounder utilizes a 3¼ inch (hook to hook) spring.  All coils are approximately ⅞ inch in diameter.  The legs of this rebounder are 7½ inches long.  The Permatron® jump mat is approximately 30½ inches in diameter. This spring is very stiff and brittle which is why its production was discontinued. Click here for Classic parts.

NEEDAK® Quality Replacement Parts click here

 

Spring Type Serial Numbers
Soft-bounce™     4A7000 to 4A8999
1F0609 to 1F9999
1X0000 to 1X9999
3X0000 to 3X9999
5X0000 to 5X9999
7X0000 to 7X9999
9X0000 to 9X9999
1T0000 to 1T9999
3T0000 to 3T9999
5T0000 to 5T9999
7T0000 to 7T9999
9T0000 to 9T9999
L00000 to L99999
Hard-bounce™ 1C1651 to 1C9999
HB0001 to HB9999 
Classic 4A0000 to 4A4999
4A9000 to 4A9999
1C0000 to 1C1650
5N0000 to 5N9999
Mobile version: Enabled
Disclaimer: NeedaksRebounder.com is an Authorized Retailer of Needak© rebounders.
Needak© is a registered Trademark of Needak© Manufacturing

Needak Rebounder

Rebounder Trampoline | Rebounder DVD | Rebounding Books | Needak Rebounders | Mini Trampoline With Handle | Needak Trampoline